Mitsubishi 00JCPU User Manual page 350

(8) I/O assignment
The mounting status of each module in the system is set.
Parameter
Item
Type
Model name
I/O assign-
0400
ment
Points
Start XY
8 - 9
Figure 8.8 I/O assignment
Table8.8 I/O assignment setting list
Description
No.
Set the type of the mounted
module.
Set the model name of the
mounted module. (Entered at
user's discretion. Do not use the
one for the CPU module.)
H
Set the number of points
assigned to each slot.
Set the start I/O number of each
slot.
Setting range
• CPU No.2 and No.3: No.n/Empty (Set
"CPU (Empty)" for the slot where no
CPU module is mounted.)
• Empty, Input, Hi input, Output, Intelli.,
I/O mix, or Interrupt
Up to 16 characters
[Q00JCPU]
0, 16, 32, 48, 64, 128, or 256 points
[Q00CPU and Q01CPU]
0, 16, 32, 48, 64, 128, 256, 512, or 1024
points
[Q00JCPU]
0 to F0
H H
[Q00CPU and Q01CPU]
0 to 3F0
H H
Default Reference
Blank Section 4.2
(To the next page)