Mitsubishi 00JCPU User Manual page 291

(3) Flow from remote password setting to reflection of the password
Set a remote password (
The remote password is transferred to the target module when the CPU module is powered off and then on or is
reset. ( (2) in this section)
Ethernet
Ethernet module
Transfers a remote
password to the
Ethernet module when
the CPU module is
powered off and then
on or is reset.
(5) in this section) and then write it to the CPU module.
GX Developer
Checks the remote
password.
GX Developer
Sets,
changes, or
clears
the remote password and writes
the result to the CPU module.
Figure 6.74 Outline of a remote password
CHAPTER6 FUNCTIONS
6 - 111
1
2
3
4
5
6
7
8