Mitsubishi 00JCPU User Manual page 368

8.2 Redundant Parameters
This section provides the list of redundant parameters and describes parameter
Parameter
Item
No.
Redundant parameter 0D00
QnPRHCPU User's Manual (Redundant System)
(1) Operation settings
The operation mode of the Redundant CPU at power-on is set.
Parameter
Item
No.
Start mode setting
Standby system watch
setting
Debug mode setting
D001
Backup mode setting
Note4
Note8.4
Basic
Redundant parameters are not available for the Basic model QCPU, High Performance model QCPU, and Process
CPU.
8 - 27
Table8.24 Redundant parameter
Description
Set the operation mode and tracking
H
transfer settings of the Redundant CPU.
Figure 8.24 Operation settings
Table8.25 Operation setting list
Description
Select the start mode when the
Redundant CPU is powered off
and then on.
Set whether to monitor errors in
the standby system.
Select whether to start the
Redundant CPU in debug
H
mode.
Select whether to check the
operating status consistency
between the control and
standby systems while the
Redundant CPU is operating in
backup mode.
High
Process
performance
Note8.4
Setting range
-
Setting range
Initial start mode/
Hot-start mode
Selected/deselected
Do not start with Debug mode/
Start with Debug mode
Selected/deselected
details.Note4
Default Reference
QnPRHCPU User's Manual
-
(Redundant System)
Default Reference
Initial start mode
Selected
QnPRHCPU User's
Do not start with
Manual (Redundant
Debug mode
System)
Selected