Mitsubishi 00JCPU User Manual page 157

2) Procedure using [Write to PLC (Flash ROM)] in GX Developer
• Select [Online]
• The Write to PLC (Flash ROM) screen appears.
• Select the target memory.
• Select a file to be written and write it to the Flash card.
(3) Adding or changing a file in the standard ROM and Flash card
Add or change the file by either of the following methods (stored files cannot be added or changed directly).
(a) When writing files using [Write the program memory to ROM] in GX Developer
• To read all files in the program memory, select [Online]
• Add or change the read files.
• Write the added or changed files to the program memory.
• Select [Online]
the standard ROM or Flash card.
(b) When writing files using [Write to PLC (Flash ROM)] in GX Developer
• To read all files in the Flash card, select [Online]
• Add or change the read files.
• Select [Online]
standard ROM or Flash card.
[Write to PLC (Flash ROM)]
Figure 5.26 Write to PLC (Flash ROM) screen
[Write to PLC (Flash ROM)]
[Write to PLC (Flash ROM)]
CHAPTER5 MEMORIES AND FILES USED FOR CPU MODULE
[Write to PLC (Flash ROM)].
[Read from PLC].
[Write the program memory to ROM] and write the files to
[Read from PLC].
[Write to PLC (Flash ROM)] and write the files to the
1
2
3
4
5
6
7
8
5 - 28