Mitsubishi 00JCPU User Manual page 158

(4) Precautions
(a) Setting the communication time check period in GX Developer
Since writing a file to the standard ROM or Flash card takes time, set "Check at communication time" in GX
Developer to 60 seconds or longer.
If the set time is short, GX Developer may time out.
(b) Writing a file from GX Developer in another station via CC-Link
Since writing a file to the standard ROM or Flash card takes time, make the CPU monitoring time setting
(SW000A) of CC-Link to 60 seconds or longer.
(The default value of 90 seconds can be used.)
GX Developer in another station
Remark
For settings of the communication time check period and CPU monitoring time, refer to the following.
GX Developer Version8 Operating Manual
5 - 29
Figure 5.27 Check at communication time setting
Figure 5.28 Writing a file from GX Developer in another station(via CC-Link)
CPU module that writes files to the
standard ROM or Flash card