Mitsubishi 00JCPU User Manual page 153

(b) Checking the memory capacity after formatting
Select [Online] [Read from PLC] in GX Developer.
1) Select "Memory card (RAM)" or "Memory card (ROM)" in "Target memory" on the Read from PLC screen.
2) Click the
Free space volume
3) The memory capacity appears in "Total free space volume".
2) Click the
Free space volume button.
Figure 5.22 Procedure for checking the memory capacity
(3) Writing to the memory card
The following describes the operations before writing and the methods for writing.
(a) Writing to the SRAM card or the ATA card
Select [Online] [Write to PLC] in GX Developer
• When writing data to the SRAM card, select "Memory card (RAM)" in "Target memory" on the Write to PLC
screen.
• When writing data to the ATA card, select "Memory card (ROM)" in "Target memory" on the Write to PLC
screen.
CHAPTER5 MEMORIES AND FILES USED FOR CPU MODULE
button.
1) Select the target memory.
Figure 5.23 Write to PLC screen
3) The memory capacity
value is shown.
1
2
3
4
5
6
7
8
5 - 24