Mitsubishi 00JCPU User Manual page 294

●
After setting a remote password, store the parameters to the program memory (drive 0).
If not, the remote password function does not work properly.
●
For boot operation, store the parameter file to the standard ROM or memory card and make setting in the Boot file tab
of GX Developer so that the parameter file is transferred to the program memory.
Then, set the parameter-valid drive of the dip switch to the standard ROM or memory card storing the parameter file (If
setting the parameter-valid drive to the program memory, the boot operation does not normally operate).
(b) Changing a remote password
Change set password in the Remote password settings screen and write a new password to the CPU module.
(c) Clearing a remote password
• To delete set remote password, click the
• Write a remote password with GX Developer.
Note24
Note6.24
Basic
The Basic model QCPU always stores parameters in the program memory.
6 - 114
Clear button in the Remote password settings screen.
Note6.24Note24
Note6.24