Alarms - Harmonic ProView 7000 User Manual

Chapter 5 Monitoring Using the Front Panel
5.1.2

Alarms

Alarms alert the user to conditions that may require attention. The LCD and Warning LED is
used to indicate alarms. The Warning LED on the front panel changes color according to the
highest alarm severity, red, orange or yellow. Red is the highest severity.
Concerning multiplex input redundancy, alarms on the backup source port of a multiplex in
port display if the relevant redundancy trigger is enabled and the threshold matches the
Redundancy Triggers configuration, see
5.1.2.1 Home Screen
The active alarm count and the number of alarms at highest severity display on the home
screen of the LCD. Alarm details display on the Alarms Table menu.
5.1.2.2 Alarms Table
The Alarms Table displays all the active alarm messages raised on the ProView 7000™. The
alarm severity level, a brief description and the time the alarm was triggered display.
The Alarm detailed screen provides the following information:
The Alarm brief description
■
The Alarm severity level and the full date and time the alarm was triggered
■
A detailed description of the alarm
■
Suggested corrective action option – select this option to display suggested corrective
■
action
See Appendix E, ProView 7000™ Alarm List
To read the alarm messages:
1. Navigate Root > Alarms Table.
Severity
1 Major
2 Critical
© 2012 Harmonic Inc.
Active Alarms (1)
Major (1)
Alarm
Link down
Voltage Error
4.3 Routing and Descrambling.
BBC
ID: 4301
No Service Selected
for the alarm list with corrective actions.
59
Device Monitoring
TV CAS
Time
22:58
ProView 7000 v.2.6, Rev. E