Device Software Upgrade Properties - Harmonic ProView 7000 User Manual

Chapter 7 Device Configuring Using EMS
The factory default passwords are:
User: configure – configure
■
User: monitor – monitor
■
Only a Configure user can change the passwords. It is recommended to change the passwords
once the device is installed to prevent unwanted tamper with the device. Resetting the
password of the device requires restoring the factory access passwords. For details, see
7.10.9 Restoring the Factory/Default Device Access
7.11.5

Device Software Upgrade Properties

The ProView 7000™ device software can be upgraded using non EMS managed tools,
consisting of BOOTP and TFTP industry standard tools.
The S/W upgrade tab sets the number of retries for each one of these two upgrade tools.
The EMS enables the user to view and switch between the current and last software version
for the device. This feature is very useful when the user selects to return to the last software
version after a software upgrade. For details, refer see
EMS provides a Software Upgrade Manager tool. For details, see
Manager.
© 2012 Harmonic Inc.
Figure 7–45: Device Properties dialog – S/W Upgrade tab
163
Passwords.
F.1 Active Version Management. The
F.2 Software Upgrade
ProView 7000 v.2.6, Rev. E
Device Properties