Decoding Channel Properties Status - Harmonic ProView 7000 User Manual

Chapter 8 Monitoring using EMS
8.6

Decoding Channel Properties Status

To display the decoding channel properties status tab:
1. Right-click a decoding channel in the Multiplex & Decoding Output box, see Figure 6–2 for
the box location.
2. Select the Status tab.
The Status tab comprises:
Error Counters – displays the count of the following errors detected and enables the user
■
to reset the status counters:
Continuity Counter Errors
❑
Subtitle Repositioning Failures
❑
Video – displays the status of the following video source parameters:
■
Codec
❑
Aspect ratio
❑
Resolution
❑
Scan type
❑
Frame rate (per second)
❑
Sequence header bitrate (in bps)
❑
GOP size and structure
❑
VBI – displays extracted VBI data information
■
Audio 1 / 2 – displays the status of the following audio 1 (or audio 2) source parameters:
■
Codec
❑
Sample rate (in kHz)
❑
audio channel mode
❑
Audio bitrate (in bps)
❑
Layer number
❑
Service – displays the PID of the following decoded elementary streams:
■
Video
❑
PCR
❑
Audio 1 and 2
❑
VBI
❑
Subtitling
❑
© 2012 Harmonic Inc. 172
Decoding Channel Properties Status
ProView 7000 v.2.6, Rev. E