Multiplex Output - Harmonic ProView 7000 User Manual

Chapter 7 Device Configuring Using EMS
Table 7–1: Multiplex Output Context Menu
Remove Selected
Remove All
Refresh Port Multiplex Out
Properties
7.3.1.1 Multiplexing an Input Program
To multiplex an input program to the output stream:
1. Select the
The Add Another Program dialog displays.
2. Select the multiplex input port and the program number to multiplex to the output.
7.3.1.2 Multiplexing an Input PID
To multiplex an input PID (either an unreferenced one or a PID from a defined program) to the
output stream:
1. Select the
The Add Unreferenced PID dialog displays.
2. Select the multiplex input port and the PID number to multiplex to the output.
TIP: Multiplexing a Program or a PID can be also done by dragging the program icon or the PID icon from
the multiplex input tree and dropping it in the multiplex output tree. For detailed instructions
7.6.1 Setting Multiplex Cross
© 2012 Harmonic Inc.
Removes the selected element.
Removes all output programs or all output unreferenced PID from the

multiplex output.

Updates the Port Multiplex Out.
Displays the marked element properties dialog. For details, see
7.3 Multiplex & Decoding
Add Other Program... option in the context menu.
Add Unreferenced PID... option in the context menu.
Connections.
100
Multiplex & Decoding Outputs
Outputs.
ProView 7000 v.2.6, Rev. E