Chapter 2 Quick Start
13. Navigate Root > Decoding > Decoder (no.) > Configuration> Programs.
If you only have a single decoder then their is no Decoder (no.) menu.
Name
1 ƒ BBC
2 ‚ CNN
3 ‚ IBA 2
The Programs menu displays a list of programs available on the input transport stream
and enables you to select the program to be decoded.
The screen displays the program name if the input stream provides an SDT table, the
program ID (decimal number), the program type (TV or Radio) and the program mode
(CAS/scrambled or FTA/free to air).
Only one program can be selected (radio button selection).
14. Navigate
Root > Decoding > Decoder (no.) > Configuration> Descrambling > CAM Selection.
If you only have a single decoder then their is no Decoder (no.) menu.
15. Select the CAM slot.
© 2012 Harmonic Inc.
ID
Type
4301
TV
4302
TV
4308
AUDIO
24
Configuring and Monitoring
Mode
CAS
CAS
FTA
ProView 7000 v.2.6, Rev. E