Output Multiplex Program Properties - Harmonic ProView 7000 User Manual

Chapter 7 Device Configuring Using EMS
Passed Program list – Displays a list of the programs passed in the stream and their
■
descrambling status.
Click Add... next to the list to open an Add Other Program dialog which enables the user to
define expected programs in the received transport stream (and not available when the TS
was routed) and to assign the descrambling CAM to the program.
Descrambling Configuration
■
Not Descrambled
❑
CAM Slot 1
❑
CAM Slot 2
❑
CAM Slot 3
❑
CAM Slot 4
❑
Descrambling Status
■
Descrambled
❑
Not Descrambled
❑
7.3.4

Output Multiplex Program Properties

The Output Program properties dialog provides basic information on the output program
provided by the output multiplex.
To display the Output Multiplex Program properties dialog:
1. Select the required Output Program icon from the Multiplex and Decoding Output box on
the Device Explorer tab.
2. Click Properties on the EMS toolbar.
© 2012 Harmonic Inc.
Figure 7–12: Add Other Program dialog
Figure 7–13: Program Properties dialog
107
Multiplex & Decoding Outputs
ProView 7000 v.2.6, Rev. E