Multi-Transport Stream Descrambler - Harmonic ProView 7000 User Manual

Chapter 1 Introduction
MPE decapsulation for offline data delivery
■
Re-multiplexing capabilities with up to four multiplexes
■
The ProView 7000™ can generate up to four (4) TS outputs from one (1) TS input
■
Re-generation of DVB and MPEG PSI/SI
■
Low Delay decoding mode
■
EMS graphical user interface providing easy drag-and-drop management
■
SNMP monitoring
■
Closed caption (CEA-608 and CEA-708) re-insertion into VANC in SD/HD-SDI output
■
On screen display of DVB subtitles in SD and HD resolutions
■
Automatic service selection of the first service in the PAT
■
Genlock
■
DSR support
■
The ProView 7000™ platform is offered in two different application oriented configurations:

Multi-Transport Stream Descrambler

■
Multi-Format Decoder
■
1.3.1 Multi-Transport Stream Descrambler
The ProView 7000™ Multi-Transport Stream Descrambler is an ideal and cost effective
receiver solution for digital headend turn around applications.
The platform's DVB-S/S2
multiplexing capabilities, fully addresses the headend reception application requirements.
The basic configuration includes:
1 x ASI input
■
2 x GbE outputs with virtual IP on the output stream
■
2 x ASI outputs (4 x ASI outputs on ProView 7100™)
■
Re-multiplexing capabilities with up to four multiplex outputs
■
Regeneration of DVB and MPEG or PSI/SI
■
Highly accurate PCR re-stamping
■
Conditional access:
■
Full transport stream descrambling
❑
Multi-program BISS descrambling – The ProView 7000 can descramble up to 12
❑
programs / 24 PIDs.
2 or 4 x DVB-CI slots
❑
CA methods: Multicrypt, Simulcrypt
❑
CAS (partial list): Viaccess®, Irdeto®, Conax®, Nagravision®
❑
8. A license is required for more than one multiplex. When using IP In, the multiplex limit is 2.
9. A license is required for more than one multiplex.
10. Requires a license with some hardware configurations, see
© 2012 Harmonic Inc.
7
(requires a Harmonic ProStream 1000)
10
, ASI and IP inputs, along with powerful descrambling and
ProView 7000™ Platform Main Features and Configurations
7
8
10
B.6 Front End Card Features
13
9
for details.
ProView 7000 v.2.6, Rev. E