Chapter 7 Device Configuring Using EMS
7.6.1.3
CAT EMM Cross Connection
To create a new CAT EMM cross connection:
1. From the Multiplex Input box, drag the icon of the required EMM and drop it into the CAT
icon in the Multiplex and Decoding Output box.
The EMM Cross-Connect Editor dialog displays, displaying the cross connect details:
Enabled – Defines the operational status (enabled/disabled) of the EMM PID.
■
Input Multiplex Port / EMM PID – Displays the name of the multiplex input which
❑
receives the stream and the input EMM identification number.
Input EMM PID.
❑
CA System ID.
❑
Output Multiplex Port / EMM PID – Displays the name of the multiplex output
❑
where the stream is routed and the output EMM identification number (identical to
the input PID).
2. Click Create to create the CAT EMM cross-connect.
© 2012 Harmonic Inc.
Figure 7–28: CAT EMM Cross Connect
133
Cross Connections
ProView 7000 v.2.6, Rev. E