Chapter 7 Device Configuring Using EMS
7.8.2
Setting Decoding Channel using the Connection Wizard
To set a Decoding Channel by using the Connection Wizard:
1. Click Connection Wizard on the EMS toolbar.
2. Select Input Program to Decoding Channel and click Next>>.
3. Select the Input Multiplex Port and click Next>>.
4. Select an input program and click Next>>.
5. Select the Decoding Channel and click Next>>.
The Decoding Channel Properties dialog displays, enabling you to review and configure
the decoder properties (for detailed description, refer to
Properties).
6. Click OK to confirm the decoding set-up.
© 2012 Harmonic Inc.
7.3.8 Decoding Channel
142
EMS Connection Wizard
ProView 7000 v.2.6, Rev. E