Proview 7000™ Management - Harmonic ProView 7000 User Manual

Chapter 1 Introduction
1.5 ProView 7000™ Management
The ProView 7000™ Platform provides a wide range of methods for local and remote
monitoring and management:
Front Panel Control
The ProView 7000™/7100 front panel provides an easy to use management interface using
the large LCD screen and intuitive controls.
Remote Element Management System (EMS)
The ProView 7000™/7100 EMS provides an extensive GUI for managing the device over a
LAN.
Network Management System
The ProView 7000™/7100 platform provides monitoring access to Network Management
Systems using its SNMP agent.
ProView 7000™/7100 Redundancy
Use NMX management for redundancy to ensure continued service in the event that a device
malfunctions. You can use a single or multiple backup ProView 7000™/7100s to ensure
continued service with a single or multiple primary ProView 7000™/7100s. This feature is
limited to the management of up to 2 output ports, ASI or SDI.
NOTE: The devices must be identical in hardware configuration, port structure and license.
See the Harmonic NMX Installation/Setup Guide for operating instructions.
© 2012 Harmonic Inc. 18
ProView 7000™ Management
ProView 7000 v.2.6, Rev. E