Chapter 7 Device Configuring Using EMS
7.3.8.2
Video Parameters Tab
The Video parameters tab provides the EMS user the following information and set-up
capabilities:
General Video processing parameters:
Decoding Codec – selects the video decoding mode.
■
Options:
Automatic
❑
MPEG-2
❑
H.264
❑
Display Format – selects the video display format.
■
Options:
SD
❑
HD
❑
Automatic
❑
The video output set-up depends on the display format selected:
Standard Definition (SD) Digital and Analog Output parameters:
Video Format – selects the video format.
■
Options:
NTSC
❑
PAL-B/G, -I, -D, -M, -N
❑
French SECAM – The CV monitor output—outputs Russian SECAM as French SECAM.
❑
Aspect Ratio Conversion – selects the aspect ratio conversion for the output stream. To be
■
performed if the incoming stream aspect ratio is not the same as the configured output
aspect ratio.
Options (related to selected aspect ratio):
4:3 Aspect ratio
❑
• Center-cut
• Letterbox
• Full Screen
• AFD
16:9 Aspect ratio
❑
• Pillarbox (Side-bars)
• Center-cut
• Full Screen
• AFD
Aspect ratio – selects the aspect ratio.
■
Options:
4:3
❑
16:9
❑
Pass Through
❑
© 2012 Harmonic Inc.
114
Multiplex & Decoding Outputs
ProView 7000 v.2.6, Rev. E