Harmonic ProView 7000 User Manual page 38

Chapter 4 Device Configuring Using the Front Panel
• 16APSK 4/5
• 16APSK 5/6
• 16APSK 8/9
• 16APSK 9/10
Roll Off – Selects the roll factor. DVB-S2 only. Options:
■
Automatic
❑
20%
❑
25%
❑
35%
❑
Pilot – DVB-S2 only. The Pilot feature should only be on when the signal has Pilot symbols,
■
otherwise the demodulator will not lock onto the signal. Options:
Automatic
❑
On
❑
Off
❑
Spectral Inversion – DVB-S and DVB-S2. Selects the mode of operation for the spectral
■
inversion function. Options:
Automatic
❑
Normal
❑
Inverted
❑
Frame Size
■
Normal – 64,800 bits frame
❑
Short – 16,200 bits frame
❑
Scrambling Seed – DVB-S2 only. sets the value for the physical layer scrambling seed. Valid
■
Range – 0 – 262141.
Polarization – DVB-S and DVB-S2. Selects the polarization of the antenna in the satellite
■
LNB. Default is Off. Options:
Vertical (13V)
❑
Horizontal (18V)
❑
Off
❑
LNB Frequency Band – DVB-S and DVB-S2. Selects the receiver frequency band according
■
to the satellite Low Noise Block (LNB) transmitting frequency band. Options:
Universal (Low: 9.75, High: 10.6)
❑
Universal Wide (Low: 9.75, High: 10.75)
❑
K Band
❑
u
C Band
❑
3. Only available with certain hardware configurations, see
© 2012 Harmonic Inc.
2
2
2
2
3
3
3
– only in DVB-S and is the DVB-S default.
3
– default for DVB-S2.
3
– DVB-S2 only. Selects the frame size. Options:
Configuring the DVB-S/S2 Input Port Properties
B.6 Front End Card Features.
38 ProView 7000 v.2.6, Rev. E