9
Erasing the Department ID and Password
7
You can erase the Department ID and password that you have registered.
NOTE
If Department ID Management is activated through the optional Card Reader-C1, you
cannot delete the Department ID.
1
2
7-24
Department ID Management
Press [Done] repeatedly until the screen below appears.
NOTE
For instructions on entering the Department ID and password, see "Entering the
Department ID and Password," on p. 2-32.
(Additional Functions) ➞ [System Settings] ➞
Press
[Dept. ID Management].
If necessary, see the screen shot in step 1 of "Registering the Department ID,
Password, and Page Limit," on p. 7-11.
If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
Press [On] ➞ [Register Dept. ID/Password].
If necessary, see the screen shot in step 2 of "Changing the Password and Page
Limit," on p. 7-19.
(numeric keys) ➞ press
-
(ID).