2
5
3
5-20
Adjusting the Machine
Adjust the position.
❑
Press [X] ➞ press [-] or [+] to adjust the horizontal position.
❑
Press [Y] ➞ press [-] or [+] to adjust the vertical position.
❑
Press [OK].
The adjustment range is from -5/16" to +5/16" (-8 mm to +8 mm).
The selected mode is set.
IMPORTANT
If [Full Surface] or [Numbers in 5 Locations] in the Copy Set Numbering mode is
selected, the page/copy/watermark position setting that is set here is ignored. For
instructions on setting the Page Numbering, Copy Set Numbering, and Watermark/
Print Date modes, see Chapter 6, "Special Copying Features - Image Editing," in
the Copying Guide, or Chapter 5, "Printing Documents in an Inbox," in the Mail Box
Guide.
NOTE
•
To enter values in millimeters, press [mm].
•
When entering values in millimeters, you can also use
(Clear) to clear your entries.
•
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
Press [Done] repeatedly until the Basic Features screen
appears.
-
(numeric keys), and