Canon imageRUNNER 6570 Reference Manual page 276

2
5
3
5-12
Adjusting the Machine
Press [Zoom Fine Adjustment].
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
Press [-] or [+] to adjust the percentage (%) ➞ press [OK].
The adjustment can be made within the range shown below:
•X (horizontal direction): -1.0% to +1.0%, in 0.1% increments
•Y (vertical direction):
If you are making an adjustment to either the X (horizontal) or Y (vertical)
direction, press [-] or [+] to enter a value for that direction only.
The selected mode is set.
-1.0% to +1.0%, in 0.1% increments