Canon imageRUNNER 6570 Reference Manual page 139

NOTE
If you press [Offset] when either the Collate or Group mode is set, each set of prints is
shifted approximately 1 1/4" (30 mm) before it is delivered to the output tray.
■ Staple Mode
The prints are automatically collated into sets arranged in page order and stapled. Prints
are stapled in the following places:
• If an original is placed on the platen glass:
Corner Staple Area
• If originals are placed in the feeder:
Corner Staple Area
Double Staple Area
Upper Left
Upper Right
Lower Right
Lower Left
Upper Left
Upper Right
Lower Right
Lower Left
Double Staple Area
Upper Right
Upper Left
Lower Right
Upper Right
Upper Left
Lower Left
Lower Right
Finisher-T1/Saddle Finisher-T2/Puncher Unit-M1
Left Side
Right Side
Left Side
Right Side
Right Side
Left Side
Right Side
Left Side
3
3-13