Control Panel Parts And Functions - Canon imageRUNNER 6570 Reference Manual

Control Panel Parts and Functions

r
a Energy Saver key
Press to set or cancel the Energy Saver mode.
b Control Panel Power Switch (Sub Power
Supply)
Press to turn the control panel ON or OFF. Press
and hold for more than three seconds to the
machine to go into the Shutdown mode. (See
"Shutting Down the Machine," on p. 1-28.) When
turned OFF, the machine is in the Sleep mode.
c Edit Pen
Use to press keys on the touch panel display,
such as when entering characters. If you lose
the edit pen, contact your local authorized
Canon dealer. Do not use an object with a sharp
end, such as a pencil or ballpoint pen, instead of
the edit pen.
d Clip Holder
Place paper clips here.
e Counter Check key
Press to display the copy and print count totals
on the touch panel display.
f Stop key
Press to stop a job in progress, such as a scan,
copy, or fax (scanning only) job.
g Start key
Press to start an operation.
h Main Power Indicator
Lights when the main power is turned ON.
Reset
ABC DEF
1
2
GHI MNO
Help
4 5
PQRS TUV WXYZ
Additional Functions
8
7
0
Display Contrast
Clear
Processing/Data
q p o n m k j
1 a b
ON/OFF
Energy Saver
3
6
Counter Check
Stop
9
Start
Error Power
i h g f e
i Error Indicator
Flashes or lights if there is an error in the
machine. When the Error indicator flashes,
follow the instructions that appear on the touch
panel display. When the Error indicator
maintains a steady red light, contact your local
authorized Canon dealer.
j Processing/Data Indicator
Flashes or blinks green when the machine is
performing operations. When the Processing/
Data indicator maintains a steady green light, fax
data is stored in memory.
k Clear key
Press to clear entered values or characters.
l Numeric keys
Press to enter numerical values.
m ID key
Press when setting or enabling Department ID
Management.
n Display Contrast Dial
Use to adjust the brightness of the touch panel
display.
o Additional Functions key
Press to specify additional functions.
p Help key
Press to display explanations of modes or
functions on the touch panel display.
q Reset key
Press to restore the standard settings of the
machine.
r Touch Panel Display
The settings screen for each function is shown
on this display.
Parts and Their Functions
c d
1-17
1