Canon imageRUNNER 6570 Reference Manual page 548

# 701
Cause
Remedy
# 703
Cause
Remedy 1 Wait a few moments, and try scanning again after the current send jobs
Remedy 2 Erase documents stored in inboxes. If the machine still does not operate
# 711
Cause
Remedy
# 712
9
Cause
Remedy
# 749
Cause
Remedy
9-76
List of Error Messages
The specified Department ID does not exist, or the password has changed.
Enter the correct Department ID or password using
the control panel, and try again. (See "Entering the Department ID and
Password," on p. 2-32.)
The hard disk is full, and no more images can be scanned.
complete.
normally, turn the main power OFF, and then back ON.
The inbox memory is full.
Erase unnecessary documents stored in the inbox. (See Chapter 6, "Receiving
Documents," in the Sending and Facsimile Guide, or Chapter 6, "Specifying
Print Settings and Arranging Documents," in the Mail Box Guide.)
The maximum number of documents are already stored in the inbox.
Erase unnecessary documents stored in the inbox. (See Chapter 6, "Receiving
Documents," in the Sending and Facsimile Guide, or Chapter 6, "Specifying
Print Settings and Arranging Documents," in the Mail Box Guide.)
You could not execute the job because a service call message is being
displayed.
Turn the main power OFF, wait for 10 or more seconds, and then turn the main
power back ON. If the machine still does not work normally, turn the main power
OFF, disconnect the machine, and then contact your local authorized Canon
dealer.
- (numeric keys) on