8
3
8-20
Paper Deck-V1 (Optional)
IMPORTANT
•
Rewrap any remaining paper in its original package, and store it in a dry place,
away from direct sunlight.
•
Do not load the following types of paper into the paper deck. Doing so may cause a
paper jam.
- Severely curled or wrinkled paper
- Thin straw paper: less than 17 lb bond (64 g/m
- Transparencies or tab paper
- Paper which has been printed on using a thermal transfer printer (Do not print on
the reverse side of this paper either.)
NOTE
•
For high-quality printouts, use paper recommended by Canon.
•
Before loading paper, always fan the sheets several times, and align the edges to
facilitate feeding.
Load the paper stack into the paper deck.
Make sure that the inside lifter has lowered before loading paper, and even out
the edges of the paper stack.
2
) (approximately)