7
5
7-6
Specifying the System Manager Settings
❑
Press [Password] ➞ enter the desired password using
❑
Press [Confirm] ➞ enter the same number to confirm the password using
(numeric keys) ➞ press [OK].
-
You cannot store a System Password with only zeros as the number, such as
<0000000>. If you enter a number that begins with zeros, the leading zeros
are ignored.
Example: If <02> or <002> is entered, <0000002> is stored.
NOTE
•
If you make a mistake when entering the password, press
password ➞ enter the correct password.
•
If Use Asterisks to Enter Access No./Passwords in System Settings (from the
Additional Functions screen) is set to 'Off', the System Password is not displayed
as asterisks (********). (See "Setting the Display Method When Entering a
Password," on p. 7-113.)
Press [System Manager] ➞ enter the System Manager's name
➞ press [OK].
-
(numeric keys).
(Clear) to clear the