7
3
7-40
Remote UI
● If you select [Off]:
❑
Press [OK].
The selected mode is set.
NOTE
•
Before setting <Use SSL> to 'On', it is necessary to set a default key in Network
Settings in System Settings (from the Additional Functions screen). (See Chapter
3, "Using a TCP/IP Network," in the Network Guide.)
•
The Remote UI is enabled only after you restart the machine (the main power
switch is turned OFF, and then back ON).
•
Any changes made to <Use SSL> are also applied to <Use SSL> in <Use HTTP>
in MEAP Settings in System Settings (from the Additional Functions screen).
Press [Done] repeatedly until the Basic Features screen
appears.