Canon imageRUNNER 6570 Reference Manual page 387

❑
Select the destination ➞ press [OK].
If the desired destination is not displayed, press [▼] or [▲] to scroll to the
desired destination.
To select all of the destinations, press [Select All]. However, if a destination is
selected, this key changes to [Clear Selection].
The selected destination is registered.
NOTE
•
You can cancel a selection by selecting the destination again.
•
To cancel all destinations, press [Clear Selection]. ([Clear Selection] changes to
[Select All].)
•
If any of the following is true for the destination machine, the message <Could not
retrieve information for the device to register. Register as a destination?> is
displayed. If you press [Yes], <Deliverable Settings> on the Details screen will be
blank.
- The main power is turned OFF.
- The destination machine is not connected to the network.
- No default key is set in Network Settings in System Settings (from the Additional
Functions screen).
- Every function in Receive Limit for Each Function under <Receiving Settings> in
Device Information Delivery Settings is set to 'On'.
5
Press [Done] repeatedly until the Basic Features screen
appears.
Specifying Device Information Delivery Settings
7
7-79