a Copy Tray-L1
The Copy Tray-L1 is equipped with the following
features: Collate, Group, and Rotate.
b Card Reader-C1
The Card Reader-C1 enables Department ID
Management to be performed with the control
cards.
c Paper Deck-V1
The Paper Deck-V1 provides an additional
source of paper for printing jobs.
The Paper Deck-V1 holds up to 3,500 sheets of
paper (20 lb bond (80 g/m
NOTE
•
Only one optional finisher can be attached to the main unit at a time.
•
The Copy Tray-L1 can be attached to the machine only if no optional finisher is attached.
2
)).
d Puncher Unit-M1
The Puncher Unit-M1 is equipped with the Hole
Punch mode. The Puncher Unit-M1 can be
attached only if the Finisher-T1 or Saddle
Finisher-T2 is attached.
e Saddle Finisher-T2
The Saddle Finisher-T2 is equipped with the
following features: Collate, Group, Offset, and
Staple (Corner, Double, and Saddle Stitch).
f Finisher-T1
The Finisher-T1 is equipped with the following
features: Collate, Group, Offset, and Staple
(Corner and Double).
System Configuration
3
3-3