Energy Consumption In The Sleep Mode - Canon imageRUNNER 6570 Reference Manual

Energy Consumption in the Sleep Mode

You can set the amount of energy that the machine consumes when it is in the
Sleep mode.
NOTE
•
If there are fewer than 10 minutes remaining before a Delayed Send job is to be sent, the
machine will not enter the Sleep mode completely.
•
In some cases, the energy consumption level in the Sleep mode is 'High' even when the
energy consumption level is set to 'Low', such as when:
- A job is being processed (including a forwarding job, report job, receive job, or sending
- Any of the following settings are set from the Additional Functions screen:
4
*1 If there are fewer than 10 minutes remaining before the specified time, the machine consumes the same amount
•
The default setting is 'Low'.
4-46
Specifying Common Settings
a forwarding done notice).
The NetWare setting is set to 'On'.
(See Chapter 4, "Using a NetWare Network (Windows)," in the Network Guide.)
The AppleTalk setting is set to 'On'.
(See Chapter 6, "Using an AppleTalk Network (Macintosh)," in the Network Guide.)
The SMB setting is set to 'On'.
(See Chapter 5, "Using a NetBIOS Network," in the Network Guide.)
The POP Interval setting is set to fewer than '10' minutes. (Excluding when the POP
Interval is set to '0'.)
(See Chapter 3, "Using a TCP/IP Network," in the Network Guide.)
The Daily Activity Report Time setting for the Send function is set to 'On'.
(See Chapter 12, "Printing Communication Reports," in the Sending and Facsimile
Guide.)
The Daily Activity Report Time setting for the Fax function is set to 'On'.
(See Chapter 12, "Printing Communication Reports," in the Sending and Facsimile
Guide.)
The time limit for receiving fax documents in memory is set.
(See Chapter 6, "Receiving Documents," in the Sending and Facsimile Guide.)
The DHCP setting is set to 'On'.
(See Chapter 3, "Using a TCP/IP Network," in the Network Guide.)
of energy as when the energy consumption level is set to 'Low'.
*1
*1
*1
*1