Canon imageRUNNER 6570 Reference Manual page 239

5
Select the desired paper type ➞ press [OK].
NOTE
•
[Transparency] can be selected only if [LTR] or [LTRR] is selected as the paper
size.
•
If you select [Transparency], [Tracing Paper], or [Labels], make sure that you do not
specify any Finisher modes (Collate, Group, or Staple).
•
For more information on paper types, see "Available Paper Stock," on p. 2-52.
6
Press [OK].
The selected mode is set.
7
Press [Done] repeatedly until the Basic Features screen
appears.
Specifying Common Settings
4
4-71