4
Press [Done] repeatedly until the Basic Features screen
appears.
Saddle Stitch Staple Repositioning
You can reposition the stapler of the saddle stitcher unit after clearing a staple jam,
or after replacing the staple cartridge. Saddle stitch staple repositioning works by
feeding several sheets of paper into the saddle stitcher unit and stapling them
together.
IMPORTANT
•
Saddle stitch staple repositioning can only be performed if the optional Saddle
Finisher-T2 is attached.
•
Only use 11" x 17", LGL, or LTRR paper for the saddle stitch staple repositioning
procedure.
•
Make sure to remove all output booklets from the optional Booklet Tray before performing
the saddle stitch staple repositioning procedure.
NOTE
Paper that is required for the saddle stitch staple repositioning procedure is automatically
fed to the saddle stitcher unit by the machine.
1
Press
[Saddle Stitcher Staple Repositioning].
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.
(Additional Functions) ➞ [Adjustment/Cleaning] ➞
Adjusting the Machine
5
5-13