● If you select [Off]:
❑
Press [OK].
The selected mode is set.
4
Press [Done] repeatedly until the Basic Features screen
appears.
Inserting a Job Separation Sheet between Copy Sets
If you are using the Collate, Offset Collate, or Staple mode, you can insert blank
pages from a selected paper drawer to separate a specified number of copies.
IMPORTANT
If you are using the Rotate Collate, Group, Offset Group, Booklet, or Saddle Stitch mode,
job separation sheets cannot be inserted between copy sets.
NOTE
The default setting is 'Off'.
1
Press
If necessary, see the screen shot in step 1 of "Initial Function at Power ON," on p.
4-24.
(Additional Functions) ➞ [Common Settings].
Specifying Common Settings
4
4-83