IMPORTANT
•
The Hole Punch mode is available only if the Puncher Unit-M1 is attached.
•
Only the following paper sizes can be hole punched: 11" x 17", LGL, LTR, LTRR, or
EXEC.
•
Holes cannot be punched in transparencies, tracing paper, labels, or pre-punched paper.
•
The machine automatically selects how many holes to punch depending on the selected
paper size.
- Two holes:
- Three holes: 11" x 17", LTR
3
3-18
Finisher-T1/Saddle Finisher-T2/Puncher Unit-M1
LGL, LTRR, EXEC