Canon imageRUNNER 6570 Reference Manual page 207

Details of each item are shown below.
[On]: The paper source is eligible for APS/ADS.
[Off]: The paper source is ineligible for APS/ADS.
The numbers on the screen represent the following paper sources:
The optional Saddle Finisher-T2,
Puncher Unit-M1, and
Paper Deck-V1 are attached.
The selected mode is set.
NOTE
•
Regardless of the stack bypass setting, you cannot select 'Off' for all of the paper
sources at the same time. At least one of the paper sources, besides the stack
bypass must be set to 'On'.
•
The settings under [Copy] include an option called [Consider Paper Type], which
determines whether the machine considers the paper type loaded in a paper
source.
- If [Consider Paper Type] is set to 'On', paper is not fed from another paper source
when the original paper source runs out of paper, unless another paper source is
loaded with the same paper size and type. For more information on stored paper
types, see "Identifying the Type of Paper in a Paper Source," on p. 4-40.
- If [Consider Paper Type] is set to 'Off', paper is fed from another paper source
when paper in the current paper source runs out, as long as the same paper size/
type is loaded in that paper source.
•
If you selected [Printer] in step 3, the Stack Bypass icon ( ) will not be displayed
on the paper selection screen in step 4.
5
Press [Done] repeatedly until the Basic Features screen
appears.
Stack Bypass
Paper Drawer 1
Paper Drawer 2
Paper Drawer 3
Paper Drawer 4
Paper Deck-V1 (optional)
Specifying Common Settings
4
4-39