Canon imageRUNNER 6570 Reference Manual page 57

IMPORTANT
If the main power indicator on the control panel does not light even though the main
power switch is ON, be sure to check the breaker to see if it is OFF. (See "When the
Power Does Not Turn ON," on p. 9-88.)
3
The screens shown below are displayed while the system
software is loading.
● If login authentication by a login service (SDL (Simple Device Login)
or SSO (Single Sign-On)) is not set, and an application other than
MEAP is selected as the initial function in Common Settings (from
the Additional Functions screen):
❑
The Start Up screen is displayed until the machine is ready to scan.
If a message is displayed on the touch panel display, proceed to step 4.
The machine is ready to scan in approximately 30 seconds (at a room
temperature of 68 ) after the screen above appears.
The screen below is displayed when the machine is ready to scan.
° F
Main Power and Control Panel Power
1
1-19