Alternating the Print Output (Offset Jobs)
The Offset Jobs mode automatically sorts the print output by job when multiple print
jobs are specified. It also ensures that output pages are always sorted even if you
forget to specify a finishing mode.
The print output is shifted alternately to the front and back of the output tray, in a
vertical (portrait) orientation, or a horizontal (landscape) orientation, depending on
the orientation of your originals. For example, if you place LTRR originals, the paper
is output and shifted in the horizontal direction. If you place LTR originals, the paper
is output and shifted in the vertical direction.
NOTE
•
[Offset Jobs] is displayed only if an optional finisher is attached.
•
The default setting is 'On'.
1
Press
If necessary, see the screen shot in step 1 of "Initial Function at Power ON," on p.
4-24.
2
Press [▼] or [▲] until [Offset Jobs] appears ➞ press
[Offset Jobs].
(Additional Functions) ➞ [Common Settings].
Specifying Common Settings
4
4-79