IMPORTANT
•
The Saddle Stitch mode is available only if the Saddle Finisher-T2 is attached.
•
The maximum number of sheets, including cover sheets, that can be saddle stitched is:
- 15 sheets (17 to 20 lb bond (64 to 80 g/m
- 10 sheets (20 to 24 lb bond (81 to 90 g/m
•
The paper sizes that can be saddle stitched are: 11" x 17", LGL, or LTRR.
•
The accuracy of folds created in the Saddle Stitch mode may vary depending on the
paper type and the number of sheets.
•
Make sure to adjust the Booklet Tray guide to match the size of the output paper before
outputting saddle stitched prints, as shown below.
3
•
A paper jam may occur if the Booklet Tray guide is not adjusted to match the size of the
output paper.
3-16
Finisher-T1/Saddle Finisher-T2/Puncher Unit-M1
11" x 17" or LGL
2
))
2
))
LTRR