Deleting A Delivery Destination - Canon imageRUNNER 6570 Reference Manual

Deleting a Delivery Destination

1
2
3
4
7
7-82
Specifying Device Information Delivery Settings
(Additional Functions) ➞ [System Settings].
Press
If necessary, see the screen shot in step 1 of "Specifying the System Manager
Settings," on p. 7-3.
If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using
Press [▼] or [▲] until [Device Information Delivery Settings]
appears ➞ press [Device Information Delivery Settings].
If necessary, see the screen shot in step 2 of "Registering Delivery Destinations,"
on p. 7-74.
Press [Register Destinations] under <Transmitting Settings>.
If necessary, see the screen shot in step 3 of "Registering Delivery Destinations,"
on p. 7-74.
Select the destination that you want to erase ➞ press [Erase].
If the desired destination is not displayed, press [▼] or [▲] to scroll to the desired
destination.
To select all of the destinations, press [Select All]. However, if a destination is
selected, this key changes to [Clear Selection].
NOTE
•
You can cancel a selection by selecting the destination again.
•
To cancel all destinations, press [Clear Selection]. ([Clear Selection] changes to
[Select All].)
(numeric keys) ➞ press
- (ID).