4
4
4-26
Specifying Common Settings
When the main power is turned ON or after the Auto Clear mode initiates:
If you select [Copy]: The Copy Basic Features screen appears.
If you select [Send]: The Send Basic Features screen appears.
If you select [Fax]: The Fax Basic Features screen appears.
If you select [Mail Box]: The Inbox Selection screen appears.
If you select [MEAP]: The MEAP application screen appears. (If no MEAP
applications are installed, a message telling you that there are no MEAP
applications installed appears.)
● If you want to set the System Monitor screen as the initial function
screen:
❑
Press [On] for <Set [System Monitor] as the Initial Function> ➞ press [OK].
The System Monitor screen is displayed when the main power is turned ON, or
after the Auto Clear mode initiates.
The selected mode is set.
NOTE
•
If you do not want to set the Device status screen as the default screen when you
press [System Monitor], press [Off] under <Set [Device] as the default screen for
[System Monitor]>. If you select [Off], the Copy Job Status screen is displayed by
default when you press [System Monitor].
•
If you select [MEAP], it takes longer to start the machine.
Press [Done] repeatedly until the Basic Features screen
appears.