Available Combination Of Options - Canon imageRUNNER 6570 Reference Manual

Available Combination of Options

This table describes the optional equipment that is needed to use each function,
the available combination of options that can be installed simultaneously, and the
limitations when installing optional equipment.
Machine
Function
Send Function
Fax Function
PDL Print
Function
Additional Copy
Tray
Collate
Group
Offset
Staple
Hole Punch
Department ID
Management *1
*1 The Department ID Management function is a standard function in this machine. If the optional Card Reader-C1 is
attached, Department ID Management is performed, and you do not have to enter the Department ID and password
manually. The Card Reader-C1 enables you to check the print totals and the remaining number of pages that can be
printed on the touch panel display.
Optional
Equipment
Needed
Universal
Send Kit (activated)
Universal Send PDF
Enhancement Kit Universal Send Kit
(activated)
Super G3
FAX Board
Multi-PDL Printer
Kit or imagePASS
Copy Tray-L1
Finisher-T1 or
Saddle Finisher-T2
Puncher Unit-M1
Card Reader-C1
Simultaneous Installation
Required
To use the Send function, the
- Universal Send Kit must be
activated.
To improve the performance
of PDF files, the Universal
Send Kit and Universal Send
PDF Enhancement Kit must
be activated.
-
The Multi-PDL Printer Kit and
- imagePASS cannot be
installed together.
The Copy Tray-L1 cannot be
- used with the Finisher-T1 or
Saddle Finisher-T2.
The Copy Tray-L1 cannot be
- used with the Finisher-T1 or
Saddle Finisher-T2.
Finisher-T1 or
Saddle
Finisher-T2
-
System Configuration
Limitations
-
-
-
3-7
3