Dividing An Original Into Equal Sections And Enlarging Each Section On A Separate Copy Sheet (Image Separation) - Canon IR3250 User Manual

Dividing an Original into Equal Sections and
Enlarging Each Section on a Separate Copy Sheet
(Image Separation)
This feature enables you to automatically divide an original into equal sections and copy each sec-
tion in enlarged form on a separate copy sheet.
NOTE
• Originals copied using the Image Separation feature must all be the same size. The Image Separation
feature cannot be combined with the Different Size Originals feature.
• When using the [1 To 4] or [Two-sided/ 1 To 4] options with 11"x17" or LGL paper, your original must be
placed horizontally.
• When using the [1 To 2] or [Two-sided/ 1 To 2] options with 11"x17" or LGL paper, your original must be
placed vertically.
• The enlargement ratio is automatically set to fit in the selected paper size.
• The Image Separation feature cannot be combined with the Entire Image, Two-sided Copy, Two-page
Separation, Transparency Interleaving, Frame Erase, or Image Combination features.
• Two-sided copying can only be selected when the optional duplex unit is installed.
The following four Image Separation features are available:
[1 To 2], [1 To 4], [Two-sided/ 1 To 2], and [Two-sided/ 1 To 4]
1 To 2
Divides a one-sided original into two equal sections and outputs the sections in enlarged form as
two 1-sided copies or one 2-sided copy.
Original
1
2
NOTE
• LTR size originals can be placed horizontally or vertically when using this feature. Originals placed verti-
cally will be divided into top and bottom divisions.
Dividing an Original into Equal Sections and Enlarging Each Section on a Separate
One-sided copy
or
1
2
Copy Sheet (Image Separation)
Two-sided copy
1
3-31