Energy Consumption In The Sleep Mode - Canon iR2025 Reference Manual

Energy Consumption in the Sleep Mode

You can set the amount of energy that the machine consumes when it is in the Sleep mode.
NOTE
• If there is a job which has been reserved for delayed sending, the machine will not enter the Sleep mode
completely.
• If you are using a management application to view or manage the settings and status of the machine via
the network, the machine may not enter the Sleep mode completely.
• If you are using the machine as a Windows printer, the machine may not enter the Sleep mode
completely if SNMP Status is enabled for your operating system (unless your computer is turned OFF).
For more information on disabling SNMP Status, contact your network administrator.
• The energy consumption level in the Sleep mode is 'High' even when the energy consumption level is
set to 'Low', such as when a job is being processed (including a forwarding job, report job, receive job,
or sending a forwarding done notice).
• The default setting is 'Low'.
• For information on each setting, see the Sending and Facsimile Guide or Network Guide.
1
Press
If necessary, see the screen shot in step 1 of "Initial Function at Power ON," on p. 4-15.
2
Press [▼] or [▲] until [Energy Consumption in Sleep Mode] appears ➞
press [Energy Consumption in Sleep Mode].
(Additional Functions) ➞ [Common Settings].
Specifying Common Settings
4
4-33