Energy Consumption in the Sleep Mode
You can set the amount of energy that the machine consumes when it is in the
Sleep mode.
NOTE
•
In some cases, the energy consumption level in the Sleep mode is 'High' even when the
energy consumption level is set to 'Low', such as when:
- A job is being processed (including a forwarding job, report job, receive job, or sending
- The optional USB board is installed.
- The optional Token Ring board is installed.
- The optional imagePASS is installed.
- Any of the following settings are set from the Additional Functions screen:
4
•
The default setting is 'Low'.
1
4-42
Specifying Common Settings
a forwarding done notice).
The Daily Activity Report Time setting for the Send function is set to 'On'.
(See Chapter 12, "Printing Communication Reports," in the Sending and Facsimile
Guide.)
The Daily Activity Report Time setting for the Fax function is set to 'On'.
(See Chapter 12, "Printing Communication Reports," in the Sending and Facsimile
Guide.)
The time limit for receiving fax documents in memory is set.
(See Chapter 6, "Receiving Documents," in the Sending and Facsimile Guide.)
The DHCP setting is set to 'On'.
(See Chapter 3, "Using a TCP/IP Network," in the Network Guide.)
The NetWare setting is set to 'On'.
(See Chapter 4, "Using a NetWare Network (Windows)," in the Network Guide.)
The AppleTalk setting is set to 'On'.
(See Chapter 6, "Using an AppleTalk Network (Macintosh)," in the Network Guide.)
The SMB setting is set to 'On'.
(See Chapter 5, "Using a NetBIOS Network," in the Network Guide.)
The POP Interval setting is set to more than '1' minute.
(See Chapter 3, "Using a TCP/IP Network," in the Network Guide.)
(Additional Functions) © [Common Settings].
Press
If necessary, see the screen shot in step 1 of "Initial Function at Power ON," on p.
4-20.