Cinema Projector Components - Christie CP4230 Setup Manual

Section 2: Installation and Setup
2.3

cinema projector Components

Touch Panel Controller (TPC)
Operator Side
Air Filter Cover and Air Filter
The air filter filters the intake air before it circulates in the front compartment to cool the main electronics. See
6.11 Replace the Light Engine Air
Manual Douser Override
Closes the douser. Closing the douser rotates a shutter blade in front of the lamp and reduces lamp power to
2kW to conserve lamp life. The override switch is meant for emergency use only.
Exhaust Duct and Vane Switch
Extracts heated air from the lamp compartment. The vane switch inside the rigid port monitors the amount of
airflow. See 2.1 Site Requirements
Adjustable Feet
Adjusts the tilting angle of the cinema projector.
2-2
Figure 2-1 cinema projector Overview
Filter.
for airflow requirements of the external heat extraction system.
Non Operator Side
Two Piece Shroud Cover
CP4230 Setup Guide
020-100669-03 Rev. 1 (05-2014)