Cinema Projector Components - Christie CP2230 Setup Manual

Installation and Setup
2.3

Cinema Projector Components

Air Filter Cover and Air Filter
The air filter filters the intake air before it circulates in the front compartment to cool the main electronics.
Manual Douser Override
Closes the douser. Closing the douser rotates a shutter blade in front of the lamp and reduces lamp power to
2kW to conserve lamp life. The override switch is meant for emergency use only.
Exhaust Duct and Vane Switch
Extracts heated air from the lamp compartment. The vane switch inside the rigid port monitors the amount of
airflow.
See 2.1 Site Requirements, on page 2-1
Adjustable Feet
Adjusts the tilting angle of the cinema projector.
Lamp Door and Lamps
Provides access to the lamp. The lamp door must remain closed and locked for normal operation. Lamp
replacement should only be performed by qualified technicians.
The cinema projector is designed to operate with 2.0kW and 3.0kW
2-2
Figure 2-1 cinema projector Overview
for airflow requirements of the external heat extraction system.
lamps.
020-100515-04 Rev. 1 (05-2014)
CP2230 Setup Guide