Cinema Projector Components - Christie CP2220 Setup Manual

2.3

Cinema Projector Components

Adjustable Feet (x4)
Source and Communication Panel
Light Engine Air Filter / Cover
Air Filter Cover and Air Filter
The air filter filters the intake air before it circulates in the front compartment to cool the main electronics.
Manual Douser Override
Closes the douser. Closing the douser rotates a shutter blade in front of the lamp and reduces lamp power to
2kW to conserve lamp life. The override switch is meant for emergency use only.
Exhaust Duct and Vane Switch
Extracts heated air from the lamp compartment. The vane switch inside the rigid port monitors the amount of
airflow.
See Section for airflow requirements of the external heat extraction system.
Adjustable Feet
Adjusts the tilting angle of the cinema projector.
2-2
Vane Switch
Exhaust Duct
RS-422 Connector
(for connection of optional
motorized lens mount)
Lens Mount
(with option to motorize)
Mounting for Motorized
Auxiliary Lens Mount (MALM)
Figure 2-1 cinema projector Overview
Top Lid Access
Touch Panel Controller (TPC)
Projection Lens
LED Status
Indicators (x 2)
Lamp Door
Liquid Cooling Air Filter / Cover
CP2220 Setup Guide
020-100476-05 Rev. 1 (05-2014)