Point-To-Point Protocol (Ppp) Fields In An Alarm Station's Definition; Table 11-1 Defining A Connection To An Alarm Station; Table 11-2 Connection Information For A Rapid Eye Site To An Alarm Station - Honeywell Rapid Eye System Administration Manual

Multi-Media Alarm Stations

Point-to-Point Protocol (PPP) Fields in an Alarm Station's Definition

218
Table 11-1 Defining a Connection to an Alarm Station
For a Connection to...
Alarm station modem
Alarm station modem using an
irregular area code, and so on
Networked alarm station
Server modem, with alarm
station networked to it
Network address translation
Table 11-2 Connection Information for a Rapid Eye Site to an Alarm Station
To Set Up Alarm Station Using...
Identical dial-up calls to on alarm
station's modem from Multi-Media units
reporting to it
Various local, long distance or
international dial-up calls, to the same
alarm station's modem
Network access
Dial-up to RAS server, to access alarm
station on server's (remote) network
Network address translation
Scope
This feature is for use in complex systems involving many Multi-Media, Multi-Media LT and
older units using modems and a RAS server to connect to a number of alarm stations.
General Case
For simple systems involving only a few units, Honeywell recommends that static PPP User
Names and Passwords be typed in an alarm station's definition.
Dial-Up IP Address
n/a

n/a

n/a

 
n/a

A Multi SA Needs...
The alarm station's:
• Telephone number
• PPP user name and password
The alarm station's:
• Telephone number
• PPP user name and password
To adjust the alarm station's telephone
number in the site definition.
The alarm station's IP address
(1) The Multi-Media alarm station's:
• IP address
(2) The RAS server's:
• Telephone number
• PPP user name and password
The IP addresses for both the Multi-Media
alarm station and the internet router.
See...
page 222
and
page 225
page 59
page 219
page 229
page 220