Storing Archived Data; Figure 12-11 Archiving Progress Bar - Honeywell Rapid Eye System Administration Manual

Storing Archived Data

Document 800-07769 Rev A
02/11
Note Archiving will not occur if either the Rapid Eye Multi-Media site has a system
password set or if the archival server is not accessible.
Figure 12-11 Archiving Progress Bar
5. Click Close when the archiving is 100% completed.
Note Only one archival policy can run at a time (immediate or scheduled). If a
policy is running when a scheduled policy is set up to run, the scheduled
policy will be queued to run when the first archival policy is finished.
Archived data is stored in the folder specified in the Server Location field. The file structure
of the archived data is as follows:
[Server Location]\[site name]\[year]\[month]\[day]\[site name]_[start time]_[end
time].dat
With this file structure, you can quickly search for files archived from specific units or for
specific times. You just need to know the unit, year, month and day that the archived clip
comes from. For example, if you archived data from the Main Unit to the E:\Backup folder
on September 2, 2008 from 2:30:00 PM to 2:59:59 PM, the path to this data would look like:
E:\Backup\Main Unit\2008\09\02\Main Unit_143000_145959.dat
Manage these data files as needed. You can delete unneeded data files, copy them or
move them to a backup server.
Note If the Server Location folder or share path is not available during archiving, the
archival policy will backup data in the working directory (the location where
the application is installed) by default.
Rapid Eye DVR System Administrator Guide
Note
Cancel, the current
archiving will stop, but
anything archived
previous to clicking
Cancel will be retained in
the local folder or
network share path
Server Location.
If you click
243